Planetary reducer is a kind of reducer we often see. If you do not pay attention to the correct use or improper operation, the circuit of the motor will be abnormal, and combustion problems will occur. In order to solve this problem, we need to know under what circumstances the planetary reducer may burn out.

1. Repeated use: this has a great impact on the reducer. When the reducer is turned on and off, the working current is very large. If we do not repeat the operation for a long time, it will directly cause the reducer to burn.

2. Blocked variable speed machine: if the reducer is stuck during mechanical operation, a large amount of heat will be generated and the machine will be burnt out.

3. Voltage instability: including different voltage and low voltage.

4. Water ingress into the motor: this damage is also very large. If the motor is powered on after water ingress, there will be a short circuit inside, and then the machine will be burned.

5. Long term overload: wrong power selection will cause the machine itself to heat up and the planetary reducer to burn out.

 The above is an introduction to the problem under which the planetary reducer will burn. If you need a planetary reducer, you are welcome to consult the manufacturer of Newgear.